Radiusclient.conf

Z Wiki UnArt Slavičín
Skočit na navigaciSkočit na vyhledávání
# General settings
 
# specify which authentication comes first respectively which
# authentication is used. possible values are: "radius" and "local".
# if you specify "radius,local" then the RADIUS server is asked
# first then the local one. if only one keyword is specified only
# this server is asked.
  auth_order	radius
 
# maximum login tries a user has (default 4)
  login_tries	4
 
# timeout for all login tries (default 60)
# if this time is exceeded the user is kicked out 
  login_timeout	60

# name of the nologin file which when it exists disables logins.
# it may be extended by the ttyname which will result in
# a terminal specific lock (e.g. /etc/nologin.ttyS2 will disable
# logins on /dev/ttyS2)   (default /etc/nologin)
  nologin /etc/nologin
 
# name of the issue file. it's only display when no username is passed
# on the radlogin command line  (default /etc/radiusclient/issue)
  issue	/usr/local/etc/radiusclient/issue
 
# RADIUS settings
 
# RADIUS server to use for authentication requests. this config
# item can appear more then one time. if multiple servers are
# defined they are tried in a round robin fashion if one
# server is not answering.
# optionally you can specify a the port number on which is remote
# RADIUS listens separated by a colon from the hostname. if
# no port is specified /etc/services is consulted of the radius
# service. if this fails also a compiled in default is used.
  authserver 	localhost:1812
 
# RADIUS server to use for accouting requests. All that I
# said for authserver applies, too. 
#
  acctserver 	localhost:1813
 
# file holding shared secrets used for the communication
# between the RADIUS client and server
  servers		/usr/local/etc/radiusclient/servers
 
# dictionary of allowed attributes and values
# just like in the normal RADIUS distributions
  dictionary 	/usr/local/etc/radiusclient/dictionary
 
# program to call for a RADIUS authenticated login 
# (default /usr/sbin/login.radius)
  login_radius	/usr/local/sbin/login.radius
 
# file which holds sequence number for communication with the
# RADIUS server
  seqfile		/var/run/radius.seq
  
# file which specifies mapping between ttyname and NAS-Port attribute
  mapfile		/usr/local/etc/radiusclient/port-id-map
 
# default authentication realm to append to all usernames if no
# realm was explicitly specified by the user
# the radiusd directly form Livingston doesnt use any realms, so leave
# it blank then
  default_realm
 
# time to wait for a reply from the RADIUS server
  radius_timeout	10
 
# resend request this many times before trying the next server
  radius_retries	3
 
# NAS-Identifier
#
# If supplied, this option will cause the client to send the given string
# as the contents of the NAS-Identifier attribute in RADIUS requests.  No
# NAS-IP-Address attribute will be sent in this case.
#
# The default behavior is to send a NAS-IP-Address option and not send
# a NAS-Identifier.  The value of the NAS-IP-Address option is chosen
# by resolving the system hostname.
 
# nas_identifier MyUniqueNASName
 
# LOCAL settings
 
# program to execute for local login
# it must support the -f flag for preauthenticated login
  login_local	/bin/login